pontec - Pond construction guide

	Language · Imprint

Tips and tricks

Pond construction guide >>>

Pond construction set installation

A pond brings life into your garden
provided it is set up correctly.

Step 1

Determine the circumference of your pond and mark it out with sand or a hosepipe.

Step 2

Plan the different pond areas (bog area 20cm, shallow water area 50 cm, and deep water area 70cm).

Step 3

Dig the hole and shape the different areas.

Step 4

Remove all stones, roots and other sharp objects, cover with pond fleece or a 10 cm thick layer of sand.

Step 5

Lay out the liner and spread over the pond area. When you fill the pond with water, the liner gradually begins to shape itself in the pond.

Step 6

Form the edge of the pond with stone liner and gravel. In time this will create a natural blending with the garden.

Step 7

Now you can start planting. Use our planting baskets for this.

Step 8

Now site the technical elements – pumps, filters and UVC – where you want them and switch on.

Step 9

Site the lighting, by placing lamps both in and out of the water.

Step 10

Top up the remaining water and site the decorative items.

Step 11

All set!


	© 2004-2008 by PfG GmbH · Postfach 2068 · 48469 Hörstel · Germany info@pontec.net We reserve the right to make any alterations and changes without prior notice, to both text and products · All specifications are taken from water surface level, and are maximum values. · Imprint